Mini Vertical Baler
Occupying no more floor space than a standard refrigerator, the ToronBale™ M brings commercial-grade waste compaction to space-constrained commercial facilities. Its three versatile 5-to-20-ton configurations run on low 1.5-to-3 kW power connections, producing easy-to-handle 15-to-120 kg bales while eliminating expensive uncompressed waste pickups.
- 5-20 Ton Hydraulic Press Ratings
- Compact 900x570 mm Base Footprint
- Produces 15-120 kg Manageable Bales
- Low 1.5-3 kW Power Consumption
Get personalized pricing for your specific requirements
- Manufacturer warranty included
- Calibration certificate on request
- Worldwide shipping and installation support
- Application specialists available before you buy
Mini Vertical Baler - ToronBale™ M
Not every business generates enough waste to justify a large baling press. The ToronBale™ M mini vertical baler from Torontech is designed for those smaller sites. It comes in 5, 10, and 20 ton versions that turn loose cardboard, paper, and packaging into dense bales weighing 15 kg to 120 kg. The 5 and 10 ton versions sit on a 900 x 570 mm base, similar in size to a home fridge, and total machine weight falls between 450 kg and 1,000 kg.
Electrical demand is modest, with 1.5 kW, 2.2 kW, and 3 kW motors across the three models. This makes the baler easy to connect in buildings where spare capacity is tight, or where rewiring would cost more than the equipment. Cafes, corner shops, clinics, and ship galleys can therefore handle their own compaction rather than keep paying for pickups of uncompressed waste.
A bottom liquid receiver can be added to any model. It sits below the chamber and gathers the fluid squeezed out of wet loads. Leftover food and damp packaging leak under pressure, and without a tray that liquid lands on the floor. Sites dealing with mixed refuse instead of dry cardboard will see the biggest gain from this add-on.
Mini Vertical Baler - ToronBale™ M Applications
This small baler suits locations that produce steady, moderate quantities of waste and have little room or electrical headroom to spare.
- Small Retail and Convenience Stores: compress daily cardboard in a stockroom without giving up a whole equipment bay
- Cafes, Restaurants, and Bars: reduce packaging waste, and with the liquid receiver, cope with wet food-service refuse
- Hotels and Guesthouses: deal with housekeeping and kitchen waste inside narrow service corridors
- Offices and Professional Practices: bale sorted paper and packaging without the footprint or power draw of a large press
- Commercial Vessels and Yachts: shrink onboard waste volume when storage space between ports is the limiting factor
- Clinics and Small Healthcare Sites: gather and compress general packaging waste away from patient areas
- Workshops and Light Manufacturing: manage packaging from components and scrap offcuts at low daily output
- Schools and Institutional Kitchens: compact cafeteria packaging and paper waste without a large investment
- Resorts and Tourist Facilities: absorb seasonal waste surges at sites with no central waste system
Standards
Torontech designs the ToronBale™ M around the safety expectations of North American and European workplaces. Its anti-rebound gate follows European and U.S. baler safety practice, a feed-gate interlock stops platen movement when the gate opens, and a separate emergency stop is mounted away from the main control panel. Because safety paperwork differs by destination market and machine configuration, check the certification marks and local code requirements with Torontech before installation.
Mini Vertical Baler - ToronBale™ M Key Features
The ToronBale™ M uses the same class of hydraulic parts and safety interlocks found on Torontech’s larger balers, packed into a body suited to tight premises.
- Compact 900 x 570 mm Footprint: the 5 and 10 ton versions need about as much floor as a home refrigerator, so they slot into stockrooms and service corridors
- Low Power Demand: motors from 1.5 to 3 kW spare older buildings from the electrical upgrades that bigger presses often require
- Optional Bottom Liquid Receiver: a tray beneath the chamber catches pressed-out fluid, which keeps floors dry and drainage under control
- Three Press Ratings, 5 to 20 Tons: with bale weights of 15 kg to 120 kg, buyers can choose the model that fits their real daily waste output
- Automatic Chain Bale Ejector: pushes the tied bale out of the chamber at the press of a button, so no one has to tip it by hand
- Anti-Rebound Gate Structure: designed to European and U.S. safety practice, it keeps compressed material from springing back and stops the door from moving unexpectedly
- Feed Gate Ram Interlock: the platen stops descending as soon as the loading gate opens, which keeps hands out of the compression zone
- Independent Emergency Stop: a separate, clearly visible circuit shuts down hydraulic operation without relying on the main controller
- Reinforced Ram Guides: hold the platen level when waste is packed unevenly and shield the cylinder seals from sideways strain
- Automatic Load-Balancing Design: shares compression force across the platen, so lopsided loads do not jolt the ram mid-stroke
- Integrated Valve Block: a Taiwan-sourced valve assembly makes servicing straightforward for machines installed far from technical support
- Direct-Coupled Motor and Pump: a cross-connected direct drive keeps motor and pump perfectly aligned, takes the place of standard couplings, and prolongs pump life
- NOK Hydraulic Seals: Japan-sourced seals stretch the time between services and cut downtime for seal changes
- A.M.C. Oil Pipe Joints: Japan-made fittings keep hydraulic lines sealed despite temperature swings and vibration
- Adjustable Bale Height: set the bale between 200 and 800 mm, depending on the model, to produce bales light enough to move without a pallet jack
Theory and Method
Tonnage by itself says little about performance. What actually compresses waste is pressure, meaning force spread over the face of the bale. In a compact chamber, even moderate force translates into effective pressure. The 20 ton ToronBale™ M pushes on an 800 x 600 mm face and generates around 400 kPa. A 60 ton press spread across an 1,800 x 1,000 mm face produces a lower figure. Tonnage grows with chamber size, not with how well the waste is compacted.
The real trade-off with a small baler is throughput, not bale quality. Chamber volume and cycle time control how much waste is processed per shift, and both are limited on this class of machine. A site producing a few cubic meters of loose waste a day will fill the chamber without trouble, but a site producing ten times as much would find the operator idle while the press catches up. Choosing a chamber that fits daily output is smarter than chasing a bigger tonnage number.
Wet waste adds another challenge. Pressing food scraps or damp packaging squeezes out liquid, and it must be directed somewhere. If it spreads across the floor, it creates a slipping risk, draws pests, and may carry non-compliant waste into a floor drain. The optional receiver beneath the chamber captures that liquid for proper disposal, which is why it is offered on a machine type so often placed close to food preparation areas.
Mini Vertical Baler - ToronBale™ M Technical Specifications
| Parameter | ToronBale™ M-5 | ToronBale™ M-10 | ToronBale™ M-20 |
|---|---|---|---|
| Press Force | 5 tons (approx. 49 kN) | 10 tons (approx. 98 kN) | 20 tons (approx. 196 kN) |
| Feed Opening Size (L × H) | 600 × 400 mm | 600 × 400 mm | 700 × 400 mm |
| Baling Chamber Height | 1,000 mm | 1,000 mm | 1,200 mm |
| Bale Size (L × W × H, H adjustable) | 600 × 400 × (200 to 600) mm | 600 × 400 × (200 to 600) mm | 800 × 600 × (400 to 800) mm |
| Bale Weight | 15 to 40 kg | 20 to 50 kg | 60 to 120 kg |
| Motor Power | 1.5 kW | 2.2 kW | 3 kW |
| Machine Weight | 450 kg | 500 kg | 1,000 kg |
| Overall Dimensions (L × W × H) | 900 × 570 × 2,240 mm | 900 × 570 × 2,240 mm | 1,180 × 800 × 2,550 mm |
| Bale Ejection | Automatic chain ejector | Automatic chain ejector | Automatic chain ejector |
| Liquid Receiver | Optional | Optional | Optional |
| Materials Handled | Food residue, paper, plastics, textile | Food residue, paper, plastics, textile | Food residue, paper, plastics, textile |
Important Delivery Information
Delivery time varies upon stock availability. Our standard dispatch and shipping times are generally within 1 week, however for some high demand items the delivery may be extended to 2-3 weeks.
Need it urgently? Contact us here to check stock and organize faster shipping.
Orders:
Purchaser acknowledges that when placing an order on the Torontech:
A. the placing of the order signifies the purchaser's assent to place said order at the Torontech and that the order will be accepted by the successful processing of the order by Torontech WorldWide LC.
B. the purchaser typing their name when requested to do so by the Torontech constitutes a signature to contract
C. the purchaser has the full authority to enter into the contract for such entity, and such grant of authority was indicated by purchaser by placement of the order through the Torontech.
D. A minimum handling fee will be applied to the shipping total for all orders.
Shipping within the U.S.A.:
All orders will be shipped best way prepaid, via courier for smaller packages or via Freight forwarders for larger crates. A handling fee may be applicable to orders. Title to merchandise transfers to the purchaser upon delivery to the carrier. Loss or damage in transit is the responsibility of the purchaser. Torontech WorldWide will provide assistance with information needed for processing claims.
Shipping outside of the U.S.A.:
All orders will be shipped best way, via courier for smaller packages or via Freight forwarders for larger crates. A low handling fee may be applicable. Title to merchandise transfers to the purchaser upon delivery to the carrier. Loss or damage in transit is the responsibility of the purchaser. Torontech WorldWide will provide assistance with information needed for processing claims. Export fees, duties, taxes, and customs clearance are the responsibility of the purchaser.
Shipping insurance is not included, please contact our sales representatives if you need shipping insurance.
Partial shipment: Torontech WorldWide reserves the right to make partial shipments unless otherwise instructed by the purchaser.
Payment terms: All payments to Torontech WorldWide are to be made in U.S. Dollars (USD)
A. Credit Card - Torontech WorldWide will accept Visa, Master Card, AMEX or Discover. Required information from the purchaser is the credit card number, 3 digit security code, expiration date, card holder's name (exactly as it appears on the card), billing address, and valid telephone number for us to use in case of difficulty. Torontech WorldWide reserves the right to delay shipment pending verification of credit card validity.
B. Wire Transfer - Transfer must be made to Torontech and confirmed for the full purchase amount (merchandise, handling and shipping) prior to shipment. Please contact us by phone at 1.877.884.TEST (8378)(outside U.S. +1.905.944.9825) or by fax at +1.954.697.8211 for bank information.
C. Open Account - Available to U.S.A. and Canadian customers only. Terms on open accounts are Net 30 days from date of shipment. Torontech WorldWide reserves the right to refuse shipment of new orders if any unpaid invoices are older than 30 days. Purchasers may apply for an open account by providing:
their bank information
3 credit references from other suppliers
Please allow 5 business days for confirmation of credit and creation of an open account.
Return Policy:
Torontech WorldWide may accept return of purchased merchandise within North America for refund or credit under the following conditions -
- There may be an additional restocking fee charged to the transaction if items are already shipped to customer.
- Goods must be returned to Torontech WorldWide within 5 days of the date of the receipt of the purchased goods.
- All freight, duties, customs, and other related shipping charges for the returned merchandise are borne by the purchaser. Shipments made freight collect will be refused.
- Merchandise must be returned properly packaged in brand new, salable condition, along with original packaging and all documentation, accessories and certificates.
- Purchaser has confirmed return authorization directly with Torontech.
- Merchandise is regular catalog item. Special order items can not be returned.
- All returned merchandise is subject to inspection by Torontech. Torontech reserves the right to refuse return of any merchandise that is used, damaged, or not part of the current published price list. In the case Torontech does not accept the returned merchandise, reasonable attempts will be made to notify the Buyer and the merchandise will be returned to Buyer as they were received by Torontech. Damaged merchandise that can be restored to original condition and thus accepted for return will be evaluated on an individual basis. The purchaser will be advised of additional expenses for the repair and restoration of the returned item. After approval, these expenses will be charged to the purchaser in addition to the restocking fee.
Change of Terms:
The acceptance of any order by Torontech WorldWide is subject to purchaser's assent to all of the terms and conditions set forth herein. Purchaser's assent to these terms and conditions shall be presumed from the purchaser's placement of an order through the Torontech. Any and all other terms and conditions are expressly rejected, and no addition or modification of terms and conditions shall be binding without the prior agreement of Torontech WorldWide in writing.
Complete Agreement:
The terms and conditions in the Torontech web site, incorporated herein by reference, including forms, acknowledgements, quotations, invoices and sales terms and conditions constitute the entire and exclusive agreement between the purchaser and Torontech WorldWide
Information:
Torontech Inc makes every effort to insure the accuracy of the product information displayed on its web sites, but makes no warranties, expressed or implied, as to the accuracy of the data portrayed on the web sites. Torontech Inc reserves the right to change product information, including pricing information at any time without notice.
Trademarks and Copyrights:
The WorldofTest.com Torontech contains trademarked product names. Product names are not to be reproduced or used in any fashion by any party other than Torontech without the express written consent of Torontech International Inc.. All pictures, descriptions, and other content of this web site are copyrighted by Torontech Inc and may not be used without the express written permission of Torontech Inc. Purchaser acknowledges that they have no right, title, or interest in the trademarks or copyrights in the products, and purchaser covenants that it will take no action to register or otherwise interfere with such rights. Please contact us with any requests for permission or questions about our trademarks.
Warranty Disclaimer:
No warranty or affirmation of fact, express or implied, other than expressly set forth herein is made or authorized by Torontech Inc. Torontech Inc disclaims any and all liability for product defect claims. Torontech Inc does not express or imply a warranty that any product on the web site(s) is fit for a particular purpose. Torontech Inc honors the product warranty as published and made available by Torontech Inc. Warranty claims for products not manufactured by Torontech are the responsibility of the manufacturer. Torontech Inc will always make its best good faith effort to resolve warranty claims.
Force Majeure:
Torontech Inc shall not be liable for any delay in or impairment of performance resulting in whole or in part from Acts of God, service interruptions, labor disruptions, insurrections, governmental decrees or controls, war risks, severe weather, supplies or raw materials, inability to procure or ship products, inability to obtain permits and/or licenses, or any other circumstances or causes beyond the control of Torontech Inc in the conduct of its business.
Torontech Inc Privacy Policy
I. What legal provisions govern our data processing practices? How and from where (internal/external sources) is personal data acquired? What are the rights of the user (web site visitor/registered customer)?
1. General
As a general principle, no personal details need to be provided when visiting our Internet site. Data made available to us by you is treated in strict confidence and in accordance with the provisions of the Federal Data Protection Act. With a few exceptions (see point 2 below), our web server only registers non-personal (anonymous) data concerning the use of our site. Specifically, the log files of our web server, as a general rule, only contain the user's IP address, the last page visited by the user, the browser used, date, time and the file requested. This anonymous data, however, does not permit conclusions to be drawn about the individual users, and merely serves to prepare statistics on the use of our Internet site for the purpose of its improvement. At the same time, great importance is placed on ensuring that usage data is not linked with personal data.
2. Personal data
Person-related data (personal data) is only used if the newsletter is ordered (by email), product(s) is (are) ordered, or to supply product information. We undertake to use the personal data entrusted to us only for the purposes stated. Purchase history is retained for assistance with future customer needs.
II. What security measures are used to protect personal data? What are the user's options for processing personal data?
3. Technical measures
Databases are optimally protected against third party access, loss, misuse and falsification through the use of appropriate technical means. In order to determine the popularity of individual topic areas, cookies are used in those sections. These text files are stored on your hard disk and facilitate your use of our Internet site. Thanks to these cookies, there is no need for specific registration each time you visit a section requiring registration, and we can supply you with the personalized contents you request.
It is for you to decide whether you want to work with cookies and, if so, which kind (permanently stored on the hard disk or only placed for the time of the browser activity). However, we draw your attention to the fact that access to fields requiring registration is only possible with activated cookies.
III. What data is communicated to third parties and for what purposes?
4. Communication of personal data
Personal data entrusted to us by you is not communicated, leased or sold to third parties.
IV. Which department answers questions about the processing of personal data?
5. Contact
In the light of the rapid technical developments in connection with the Internet, we make every effort to constantly improve our Internet site and technical precautions, including those connected with data protection. We will keep you suitably informed about such measures. Any changes will be published here. Further information is available at any time by contacting Torontech Inc.
Disclaimer of liability Torontech Inc shall not be liable for direct, indirect or consequential losses resulting from or in connection with access to, use of or queries to the Torontech web site or its links with other web sites, even if Torontech Inc has previously been informed of the possibility of such losses. No guarantee is provided as to the accuracy of the information disseminated via the Torontech Inc web site. In addition, Torontech Inc guarantees neither the reliability nor the completeness of the information contained on its web site. The information made available on the Torontech and WorldofTest.com web site may be amended at any time without prior notice. In particular, Torontech Inc shall not be liable for losses caused by transmission errors, technical faults and interruptions, breakdowns or an unlawful interference with the user's data processing system or the generally accessible systems and transmission networks. Nor shall Torontech Inc be liable for losses resulting from breakdowns, interruptions or overloads occurring to any data processing systems. If certain links are activated on the Torontech and WorldofTest.com web site, the user may under certain circumstances leave the Torontech web site. Torontech Inc assumes no responsibility for the contents, products or services offered or other information or offers contained on these linked web sites.
