Paper and Cardboard Baler
Engineered to keep continuous fiber recovery moving without interruption, the ToronBale™ PC converts loose corrugated board and print scrap into mill-ready bales up to 700 kg. Its auto-lifting door and 1,800 mm feed throat eliminate carton pre-folding, maximizing shift throughput across four 30-to-60-ton configurations.
- 30-60 Ton Compaction Force Ratings
- Produces 150-700 kg Mill-Ready Bales
- Wide 1,100-1,800 mm Feed Openings
- Heavy 1,900-4,500 kg Structural Frame
Obtenez une tarification personnalisée pour vos besoins spécifiques
- Manufacturer warranty included
- Calibration certificate on request
- Worldwide shipping and installation support
- Application specialists available before you buy
Paper and Cardboard Baler - ToronBale™ PC
Facilities that generate fiber waste all day need more than a light-duty press tucked in a back room. The ToronBale™ PC paper and cardboard baler is built for that workload, turning loose recovered fiber into dense, mill-ready bales. Torontech supplies it in four models rated from 30 to 60 tons, with finished bale weights from 150 kg to 700 kg. The feed opening is 1,100 mm to 1,800 mm wide, so whole corrugated cartons and full press sheets drop straight in with no cutting or folding. Unit weight runs from 1,900 kg to 4,500 kg depending on the model.
Loading is designed to keep material moving. The feed door rises on its own with the platen, so the operator keeps loading without reaching for a door control between strokes. Over hundreds of cycles per shift, those seconds add up. When a bale is tied, the chain ejector pulls it out of the chamber, replacing the manual tipping that slows down older balers.
The bale size is also chosen with buyers and carriers in mind. The 60-ton model forms 1,800 mm by 1,000 mm bales of up to 700 kg, a footprint that stacks cleanly into trailers and containers. Corrugated converters, print shops, material recovery facilities (MRFs) and distribution centers all run this cardboard baler across the four sizes.
Paper and Cardboard Baler - ToronBale™ PC Applications
This waste paper baler suits any site that produces recovered paper and board every day in volumes mills are willing to buy.
- Corrugated Packaging Plants: compacts scrap, trim and rejected sheets into bales that go back to the paper mill under supply contracts
- Commercial Printing and Bindery: turns press waste, makeready sheets and guillotine offcuts into sorted bales that sell as recovered fiber
- Material Recovery Facilities: compresses sorted OCC and mixed paper as it leaves the picking line
- Distribution Centers and 3PL Warehouses: clears the steady stream of carton waste that builds up at receiving docks
- Retail Chains and Supermarkets: gathers back-of-house cardboard into bales where daily output justifies a full-size machine
- Office Buildings and Document Destruction: compresses sorted office paper and shredded material into higher-grade fiber bales
- E-Commerce Fulfillment Centers: handles the cartons and paper void fill that pick-and-pack lines produce
- Paper Mills and Recycling Depots: converts loose incoming fiber into compact, transport-ready bales before storage or resale
- Publishing and Newsprint Recovery: presses returned newspapers and magazines into bales for resale
Safety Standards
Torontech designs the ToronBale™ PC around the safety expectations of North American and European plants. Protection comes from an anti-rebound gate structure in line with European and U.S. baler safety practice, a feed-gate interlock that stops platen movement, a start interlock that keeps the machine from running with the safety door open, and a separate emergency stop. Because safety paperwork differs by destination market and machine configuration, check certification marks and local code requirements with Torontech before the unit is installed.
Paper and Cardboard Baler - ToronBale™ PC Key Features
This hydraulic paper baler combines a wide loading mouth with safety interlocks and hydraulic parts selected for continuous, high-volume operation.
- Wide Feed Opening, up to 1,800 mm: swallows uncut corrugated cartons and full press sheets, so nothing needs pre-breaking or folding
- Auto-Lifting Feed Door: travels upward together with the platen, eliminating a manual door step in every cycle
- Automatic Chain Bale Ejector: pushes the tied bale out at the touch of a control, ending manual tipping of loads up to 700 kg
- Press Force from 30 to 60 Tons: four ratings cover everything from single-site recovery to heavy converting and mill-feed duty
- Anti-Rebound Gate Structure: designed to European and U.S. safety practice, it keeps compressed fiber contained and stops the door from moving uncontrolled
- Feed Gate Ram Interlock: halts the platen’s downward stroke the instant the loading gate opens, keeping hands out of the compaction zone
- Safety Door Start Interlock: blocks start-up while the safety door is open, preventing a frequent cause of accidental cycling
- Independent Emergency Stop: a dedicated, easy-to-reach circuit that shuts down hydraulic power separately from the main controls
- Reinforced Ram Guides: hold the platen square when loads are uneven, shielding the cylinder seals from side loading
- Automatic Load-Balancing Design: spreads compaction force evenly over the platen, so off-center loads cannot shove the ram sideways mid-stroke
- Superposed Valve Block: a Taiwanese-sourced stacked valve unit that needs less installation room and gives technicians easier access
- Direct-Coupled Motor and Pump: a cross-connected direct drive keeps the motor and pump perfectly concentric, replaces standard couplings and prolongs pump life
- NOK Hydraulic Seals: Japanese-sourced seals that stretch service intervals and cut downtime for seal changes
- A.M.C. Oil Pipe Joints: Japanese-made fittings that stay leak-free despite heat cycles and constant vibration
- Adjustable Bale Height: adjustable from 500 to 1,050 mm depending on the model, allowing operators to tune bale weight to trailer or container loading
Theory and Method
Fiber is paid for by weight but shipped by volume, and that mismatch shapes the economics of any paper baler. Loose corrugated occupies about ten times the space it does once baled, which means a trailer runs out of room well before it hits its weight limit. Denser bales shift the limit back to payload, the measure freight charges are really based on. Press force exists to improve this ratio, though every extra bit of density after the first easy compression costs far more force than the last.
The geometry of the feed area controls how quickly the chamber fills. On the largest model, a 1,800 mm opening takes a flattened shipping carton in one piece, whereas a narrow throat would make an operator tear or fold that same carton first. A door that rises with the platen also saves a second manual motion every cycle. Larger, less frequent charges build flatter, more uniform layers than a stream of small ones, and that matters because uneven layering makes bales bulge and loads the straps unevenly.
The wide bale weight ranges have little to do with the machine itself. Recovered paper differs sharply in basis weight and moisture, so a bale of double-wall corrugated at ambient humidity weighs much more than a bale of sorted office paper of equal size. The published ranges therefore show what the chamber can produce across realistic grades and are not a promised single figure. To hit a target weight, operators tune bale height and stroke count to the material in the chamber.
Paper and Cardboard Baler - ToronBale™ PC Technical Specifications
| Parameter | ToronBale™ PC-30 | ToronBale™ PC-40 | ToronBale™ PC-50 | ToronBale™ PC-60 |
|---|---|---|---|---|
| Press Force | 30 tons (approx. 294 kN) | 40 tons (approx. 392 kN) | 50 tons (approx. 490 kN) | 60 tons (approx. 589 kN) |
| Feed Opening Size (L × H) | 1,100 × 500 mm | 1,200 × 500 mm | 1,500 × 500 mm | 1,800 × 550 mm |
| Baling Chamber Height | 1,400 mm | 1,500 mm | 1,500 mm | 1,600 mm |
| Bale Size (L × W × H, H adjustable) | 1,100 × 700 × (500 to 900) mm | 1,200 × 800 × (600 to 1,000) mm | 1,500 × 760 × (600 to 1,000) mm | 1,800 × 1,000 × (700 to 1,050) mm |
| Bale Weight | 150 to 250 kg | 200 to 450 kg | 300 to 500 kg | 500 to 700 kg |
| Motor Power | 5.5 kW | 7.5 kW | 7.5 kW | 11 kW |
| Machine Weight | 1,900 kg | 2,300 kg | 2,800 kg | 4,500 kg |
| Overall Dimensions (L × W × H) | 1,500 × 1,050 × 2,900 mm | 1,650 × 1,200 × 3,100 mm | 2,000 × 1,150 × 3,100 mm | 2,260 × 1,350 × 3,170 mm |
| Bale Ejection | Automatic chain ejector | Automatic chain ejector | Automatic chain ejector | Automatic chain ejector |
| Materials Handled | Cardboard, cartons, newspaper, mixed paper | Cardboard, cartons, newspaper, mixed paper | Cardboard, cartons, newspaper, mixed paper | Cardboard, cartons, newspaper, mixed paper |
Important Delivery Information
Delivery time varies upon stock availability. Our standard dispatch and shipping times are generally within 1 week, however for some high demand items the delivery may be extended to 2-3 weeks.
Need it urgently? Contact us here to check stock and organize faster shipping.
Orders:
Purchaser acknowledges that when placing an order on the Torontech:
A. the placing of the order signifies the purchaser's assent to place said order at the Torontech and that the order will be accepted by the successful processing of the order by Torontech WorldWide LC.
B. the purchaser typing their name when requested to do so by the Torontech constitutes a signature to contract
C. the purchaser has the full authority to enter into the contract for such entity, and such grant of authority was indicated by purchaser by placement of the order through the Torontech.
D. A minimum handling fee will be applied to the shipping total for all orders.
Shipping within the U.S.A.:
All orders will be shipped best way prepaid, via courier for smaller packages or via Freight forwarders for larger crates. A handling fee may be applicable to orders. Title to merchandise transfers to the purchaser upon delivery to the carrier. Loss or damage in transit is the responsibility of the purchaser. Torontech WorldWide will provide assistance with information needed for processing claims.
Shipping outside of the U.S.A.:
All orders will be shipped best way, via courier for smaller packages or via Freight forwarders for larger crates. A low handling fee may be applicable. Title to merchandise transfers to the purchaser upon delivery to the carrier. Loss or damage in transit is the responsibility of the purchaser. Torontech WorldWide will provide assistance with information needed for processing claims. Export fees, duties, taxes, and customs clearance are the responsibility of the purchaser.
Shipping insurance is not included, please contact our sales representatives if you need shipping insurance.
Partial shipment: Torontech WorldWide reserves the right to make partial shipments unless otherwise instructed by the purchaser.
Payment terms: All payments to Torontech WorldWide are to be made in U.S. Dollars (USD)
A. Credit Card - Torontech WorldWide will accept Visa, Master Card, AMEX or Discover. Required information from the purchaser is the credit card number, 3 digit security code, expiration date, card holder's name (exactly as it appears on the card), billing address, and valid telephone number for us to use in case of difficulty. Torontech WorldWide reserves the right to delay shipment pending verification of credit card validity.
B. Wire Transfer - Transfer must be made to Torontech and confirmed for the full purchase amount (merchandise, handling and shipping) prior to shipment. Please contact us by phone at 1.877.884.TEST (8378)(outside U.S. +1.905.944.9825) or by fax at +1.954.697.8211 for bank information.
C. Open Account - Available to U.S.A. and Canadian customers only. Terms on open accounts are Net 30 days from date of shipment. Torontech WorldWide reserves the right to refuse shipment of new orders if any unpaid invoices are older than 30 days. Purchasers may apply for an open account by providing:
their bank information
3 credit references from other suppliers
Please allow 5 business days for confirmation of credit and creation of an open account.
Return Policy:
Torontech WorldWide may accept return of purchased merchandise within North America for refund or credit under the following conditions -
- There may be an additional restocking fee charged to the transaction if items are already shipped to customer.
- Goods must be returned to Torontech WorldWide within 5 days of the date of the receipt of the purchased goods.
- All freight, duties, customs, and other related shipping charges for the returned merchandise are borne by the purchaser. Shipments made freight collect will be refused.
- Merchandise must be returned properly packaged in brand new, salable condition, along with original packaging and all documentation, accessories and certificates.
- Purchaser has confirmed return authorization directly with Torontech.
- Merchandise is regular catalog item. Special order items can not be returned.
- All returned merchandise is subject to inspection by Torontech. Torontech reserves the right to refuse return of any merchandise that is used, damaged, or not part of the current published price list. In the case Torontech does not accept the returned merchandise, reasonable attempts will be made to notify the Buyer and the merchandise will be returned to Buyer as they were received by Torontech. Damaged merchandise that can be restored to original condition and thus accepted for return will be evaluated on an individual basis. The purchaser will be advised of additional expenses for the repair and restoration of the returned item. After approval, these expenses will be charged to the purchaser in addition to the restocking fee.
Change of Terms:
The acceptance of any order by Torontech WorldWide is subject to purchaser's assent to all of the terms and conditions set forth herein. Purchaser's assent to these terms and conditions shall be presumed from the purchaser's placement of an order through the Torontech. Any and all other terms and conditions are expressly rejected, and no addition or modification of terms and conditions shall be binding without the prior agreement of Torontech WorldWide in writing.
Complete Agreement:
The terms and conditions in the Torontech web site, incorporated herein by reference, including forms, acknowledgements, quotations, invoices and sales terms and conditions constitute the entire and exclusive agreement between the purchaser and Torontech WorldWide
Information:
Torontech Inc makes every effort to insure the accuracy of the product information displayed on its web sites, but makes no warranties, expressed or implied, as to the accuracy of the data portrayed on the web sites. Torontech Inc reserves the right to change product information, including pricing information at any time without notice.
Trademarks and Copyrights:
The WorldofTest.com Torontech contains trademarked product names. Product names are not to be reproduced or used in any fashion by any party other than Torontech without the express written consent of Torontech International Inc.. All pictures, descriptions, and other content of this web site are copyrighted by Torontech Inc and may not be used without the express written permission of Torontech Inc. Purchaser acknowledges that they have no right, title, or interest in the trademarks or copyrights in the products, and purchaser covenants that it will take no action to register or otherwise interfere with such rights. Please contact us with any requests for permission or questions about our trademarks.
Warranty Disclaimer:
No warranty or affirmation of fact, express or implied, other than expressly set forth herein is made or authorized by Torontech Inc. Torontech Inc disclaims any and all liability for product defect claims. Torontech Inc does not express or imply a warranty that any product on the web site(s) is fit for a particular purpose. Torontech Inc honors the product warranty as published and made available by Torontech Inc. Warranty claims for products not manufactured by Torontech are the responsibility of the manufacturer. Torontech Inc will always make its best good faith effort to resolve warranty claims.
Force Majeure:
Torontech Inc shall not be liable for any delay in or impairment of performance resulting in whole or in part from Acts of God, service interruptions, labor disruptions, insurrections, governmental decrees or controls, war risks, severe weather, supplies or raw materials, inability to procure or ship products, inability to obtain permits and/or licenses, or any other circumstances or causes beyond the control of Torontech Inc in the conduct of its business.
Torontech Inc Privacy Policy
I. What legal provisions govern our data processing practices? How and from where (internal/external sources) is personal data acquired? What are the rights of the user (web site visitor/registered customer)?
1. General
As a general principle, no personal details need to be provided when visiting our Internet site. Data made available to us by you is treated in strict confidence and in accordance with the provisions of the Federal Data Protection Act. With a few exceptions (see point 2 below), our web server only registers non-personal (anonymous) data concerning the use of our site. Specifically, the log files of our web server, as a general rule, only contain the user's IP address, the last page visited by the user, the browser used, date, time and the file requested. This anonymous data, however, does not permit conclusions to be drawn about the individual users, and merely serves to prepare statistics on the use of our Internet site for the purpose of its improvement. At the same time, great importance is placed on ensuring that usage data is not linked with personal data.
2. Personal data
Person-related data (personal data) is only used if the newsletter is ordered (by email), product(s) is (are) ordered, or to supply product information. We undertake to use the personal data entrusted to us only for the purposes stated. Purchase history is retained for assistance with future customer needs.
II. What security measures are used to protect personal data? What are the user's options for processing personal data?
3. Technical measures
Databases are optimally protected against third party access, loss, misuse and falsification through the use of appropriate technical means. In order to determine the popularity of individual topic areas, cookies are used in those sections. These text files are stored on your hard disk and facilitate your use of our Internet site. Thanks to these cookies, there is no need for specific registration each time you visit a section requiring registration, and we can supply you with the personalized contents you request.
It is for you to decide whether you want to work with cookies and, if so, which kind (permanently stored on the hard disk or only placed for the time of the browser activity). However, we draw your attention to the fact that access to fields requiring registration is only possible with activated cookies.
III. What data is communicated to third parties and for what purposes?
4. Communication of personal data
Personal data entrusted to us by you is not communicated, leased or sold to third parties.
IV. Which department answers questions about the processing of personal data?
5. Contact
In the light of the rapid technical developments in connection with the Internet, we make every effort to constantly improve our Internet site and technical precautions, including those connected with data protection. We will keep you suitably informed about such measures. Any changes will be published here. Further information is available at any time by contacting Torontech Inc.
Disclaimer of liability Torontech Inc shall not be liable for direct, indirect or consequential losses resulting from or in connection with access to, use of or queries to the Torontech web site or its links with other web sites, even if Torontech Inc has previously been informed of the possibility of such losses. No guarantee is provided as to the accuracy of the information disseminated via the Torontech Inc web site. In addition, Torontech Inc guarantees neither the reliability nor the completeness of the information contained on its web site. The information made available on the Torontech and WorldofTest.com web site may be amended at any time without prior notice. In particular, Torontech Inc shall not be liable for losses caused by transmission errors, technical faults and interruptions, breakdowns or an unlawful interference with the user's data processing system or the generally accessible systems and transmission networks. Nor shall Torontech Inc be liable for losses resulting from breakdowns, interruptions or overloads occurring to any data processing systems. If certain links are activated on the Torontech and WorldofTest.com web site, the user may under certain circumstances leave the Torontech web site. Torontech Inc assumes no responsibility for the contents, products or services offered or other information or offers contained on these linked web sites.
