Drum Crusher
The ToronDC™ is a high-power hydraulic drum crusher engineered to reduce spent steel and oil drums into flat, stackable plates. Built for scrap yards and industrial facilities, it applies 20 tons of pressing force to crush 200-litre containers within a fast 26-second cycle without sacrificing operator safety.
- 20-Ton Hydraulic Crushing Force
- Handles 200-Litre Steel Drums
- Fast 26-Second Cycle Time
- Flattens To 100 mm Plates
Obtenez une tarification personnalisée pour vos besoins spécifiques
- Manufacturer warranty included
- Calibration certificate on request
- Worldwide shipping and installation support
- Application specialists available before you buy
Drum Crusher – ToronDC™ | 20-Ton Hydraulic Steel & Oil Drum Crusher
The ToronDC™ drum crusher flattens steel and oil drums up to 200 litres into 100 mm plates, shrinking the space a spent drum takes up to roughly one quarter of its original volume. Torontech supplies this industrial drum crusher as a 20-ton unit with a 760 × 760 mm crushing chamber and a 26-second cycle time. It occupies a 1,000 × 1,050 mm footprint, stands 2,800 mm tall, and weighs 1,000 kg. A 7.5 kW hydraulic power pack drives the press.
Built-in drum puncturing for safe, clean crushing
Spikes set into the press plate puncture the drum as compression begins, and this step matters more than it sounds. A closed drum is a sealed cylinder, and crushing one without venting traps air that pressurizes and can throw the drum sideways instead of flattening it. Puncturing also lets residual liquid drain rather than being forced out under pressure.
Optional liquid receiver
An optional liquid receiver mounts beneath the chamber to collect whatever drains during crushing, keeping the work area cleaner.
Applications
Scrap yards, drum reconditioners, chemical plants, and lubricant distributors all rely on this drum crusher machine. A spent drum becomes flat steel that stacks on a pallet and sells by weight, while handling, storage, and freight become simpler at the same time.
Key specifications
- Drum capacity: up to 200 litres
- Crushed thickness: 100 mm
- Crushing force: 20 ton
- Chamber size: 760 × 760 mm
- Cycle time: 26 seconds
- Footprint: 1,000 × 1,050 mm
- Height: 2,800 mm
- Weight: 1,000 kg
- Hydraulic power: 7.5 kW
Drum Crusher – ToronDC™ Applications | Industries That Use It
The ToronDC™ drum crusher suits operations that accumulate empty steel drums faster than they can move them out whole. Here is where it fits best:
- Scrap Metal Yards: Flattens incoming steel drums into stackable plate that ships at useful density instead of as bulky empties.
- Drum Reconditioning Operations: Crushes drums judged beyond reconditioning, keeping the reject stream out of the yard.
- Lubricant and Oil Distribution: Handles the steady return flow of empty oil drums at depots and blending plants.
- Chemical Manufacturing and Blending: Compacts drums after they meet the empty-container criteria that apply locally.
- Paint and Coatings Production: Flattens spent resin, solvent, and pigment drums once residues are removed.
- Food and Beverage Processing: Processes drums from concentrate, oil, and ingredient deliveries.
- Waste Management and Transfer Stations: Cuts drum volume before onward transport to processors.
- Ports and Marine Terminals: Consolidates the drums that build up from bunkering and ship supply operations.
- Mining and Remote Site Operations: Compacts fuel and lubricant drums where backhaul capacity is limited and costly.
Safety Standards and Compliance
Torontech builds the ToronDC™ steel drum crusher to the safety conventions expected in North American and European facilities. Its safety features include:
- An anti-rebound gate structure aligned with European and U.S. practice
- A start interlock that blocks the motor unless the door is closed
- A ram stop that engages when the door opens
- An independent emergency stop
The supplier states that the machine is intended for drums without explosive content. Operators remain responsible for confirming that drums meet the empty-container criteria applicable in their jurisdiction before crushing.
Drum Crusher – ToronDC™ Key Features | 20-Ton Hydraulic Drum Crusher
The ToronDC™ drum crusher combines the force to fold a steel drum with the venting and interlocks that keep the operation controlled.
Crushing Performance
- Puncturing Spikes in the Press Plate: Open the drum as compression starts, releasing trapped air and letting residual liquid drain rather than spray.
- 20-Ton Press Force: Carries a 200-litre drum past initial buckling and flattens it to a uniform 100 mm plate.
- 26-Second Cycle Time: A full crush and unload sequence short enough to keep pace with a steady drum flow.
- 760 × 760 mm Chamber: Fits a full-diameter drum without the operator needing to position it precisely.
- Optional Bottom Liquid Receiver: A tray beneath the chamber collects drainage for controlled disposal instead of letting it reach the floor.
Operator Safety Features
- Door-Closed Start Interlock: The motor will not run unless the door is closed, removing a common source of unintended operation.
- Door-Open Ram Stop: Downward platen travel halts the moment the door opens, keeping hands clear of the compaction zone.
- Independent Emergency Stop: A dedicated, prominently mounted circuit cuts hydraulic function apart from the main control system.
- Anti-Rebound Gate Structure: Built to European and U.S. safety practice, it holds the compressed drum in place and blocks uncontrolled door movement.
Reliable Hydraulic Components
- NOK Hydraulic Seals: Japanese-sourced sealing components extend service intervals and reduce seal replacement downtime.
- A.M.C. Oil Pipe Joints: Japanese-made fittings keep hydraulic connections leak-free in an environment where drum residues reach the machine.
Space-Saving Design
- Compact 1,000 × 1,050 mm Footprint: Fits in a yard corner or a drum staging area without dedicating a bay to it.
Drum Crusher – ToronDC™ Theory and Method | How a Hydraulic Drum Crusher Works
A steel drum resists crushing far less than its size suggests, because thin-walled cylinders fail by buckling rather than by yielding. The wall of a 200-litre drum is roughly one millimetre thick. Once axial load passes the point where that wall can no longer hold its curvature, it folds into concertina patterns at a stress far below what bulk deformation would require. The ToronDC™ drum crusher’s 20-ton rating gives margin beyond initial collapse, flattening the drum to a consistent 100 mm plate.
Why Venting Matters: Puncturing Before Compression
Trapped air is the real obstacle. Compressing a sealed cylinder raises internal pressure, and the drum will find the weakest path out, which may be a seam splitting sideways or the whole unit ejecting from under the platen. Spikes in the press plate open the drum before pressure can build, converting a sealed vessel into an open one. The same holes let residual liquid drain downward into the optional liquid receiver instead of spraying from a rupture.
Drum Contents and Safe Crushing Practice
Residual contents determine whether crushing is safe at all. A drum that held flammable liquid retains vapour in the headspace long after it looks empty. The mechanical energy from puncturing and folding steel is more than enough to act as an ignition source. That is why the supplier limits the machine to drums without explosive content, and why a drum’s history matters more than its appearance before it goes into the chamber.
Key takeaways
- Thin drum walls fail by buckling, so a 20-ton press flattens a 200-litre drum to 100 mm with ease.
- Puncturing spikes vent trapped air and drain residual liquid at the start of the stroke.
- Confirm a drum’s previous contents and empty-container status before crushing.
Drum Crusher - ToronDC™ Technical Specifications
| Parameter | Specification |
|---|---|
| Press Force | 20 tons (approx. 196 kN) |
| Drum Capacity | Up to 200 litres, without explosive content |
| Crushing Chamber Size (L × W × H) | 760 × 760 × 1,100 mm |
| Crushed Output Size (L × W × H) | 760 × 760 × 100 mm |
| Unload Cycle Time | 26 seconds |
| Motor Power | 7.5 kW |
| Machine Weight | 1,000 kg |
| Overall Dimensions (L × W × H) | 1,000 × 1,050 × 2,800 mm |
| Liquid Receiver | Optional, bottom-mounted |
| Materials Handled | Steel drums, oil drums, paint drums |
Important Delivery Information
Delivery time varies upon stock availability. Our standard dispatch and shipping times are generally within 1 week, however for some high demand items the delivery may be extended to 2-3 weeks.
Need it urgently? Contact us here to check stock and organize faster shipping.
Orders:
Purchaser acknowledges that when placing an order on the Torontech:
A. the placing of the order signifies the purchaser's assent to place said order at the Torontech and that the order will be accepted by the successful processing of the order by Torontech WorldWide LC.
B. the purchaser typing their name when requested to do so by the Torontech constitutes a signature to contract
C. the purchaser has the full authority to enter into the contract for such entity, and such grant of authority was indicated by purchaser by placement of the order through the Torontech.
D. A minimum handling fee will be applied to the shipping total for all orders.
Shipping within the U.S.A.:
All orders will be shipped best way prepaid, via courier for smaller packages or via Freight forwarders for larger crates. A handling fee may be applicable to orders. Title to merchandise transfers to the purchaser upon delivery to the carrier. Loss or damage in transit is the responsibility of the purchaser. Torontech WorldWide will provide assistance with information needed for processing claims.
Shipping outside of the U.S.A.:
All orders will be shipped best way, via courier for smaller packages or via Freight forwarders for larger crates. A low handling fee may be applicable. Title to merchandise transfers to the purchaser upon delivery to the carrier. Loss or damage in transit is the responsibility of the purchaser. Torontech WorldWide will provide assistance with information needed for processing claims. Export fees, duties, taxes, and customs clearance are the responsibility of the purchaser.
Shipping insurance is not included, please contact our sales representatives if you need shipping insurance.
Partial shipment: Torontech WorldWide reserves the right to make partial shipments unless otherwise instructed by the purchaser.
Payment terms: All payments to Torontech WorldWide are to be made in U.S. Dollars (USD)
A. Credit Card - Torontech WorldWide will accept Visa, Master Card, AMEX or Discover. Required information from the purchaser is the credit card number, 3 digit security code, expiration date, card holder's name (exactly as it appears on the card), billing address, and valid telephone number for us to use in case of difficulty. Torontech WorldWide reserves the right to delay shipment pending verification of credit card validity.
B. Wire Transfer - Transfer must be made to Torontech and confirmed for the full purchase amount (merchandise, handling and shipping) prior to shipment. Please contact us by phone at 1.877.884.TEST (8378)(outside U.S. +1.905.944.9825) or by fax at +1.954.697.8211 for bank information.
C. Open Account - Available to U.S.A. and Canadian customers only. Terms on open accounts are Net 30 days from date of shipment. Torontech WorldWide reserves the right to refuse shipment of new orders if any unpaid invoices are older than 30 days. Purchasers may apply for an open account by providing:
their bank information
3 credit references from other suppliers
Please allow 5 business days for confirmation of credit and creation of an open account.
Return Policy:
Torontech WorldWide may accept return of purchased merchandise within North America for refund or credit under the following conditions -
- There may be an additional restocking fee charged to the transaction if items are already shipped to customer.
- Goods must be returned to Torontech WorldWide within 5 days of the date of the receipt of the purchased goods.
- All freight, duties, customs, and other related shipping charges for the returned merchandise are borne by the purchaser. Shipments made freight collect will be refused.
- Merchandise must be returned properly packaged in brand new, salable condition, along with original packaging and all documentation, accessories and certificates.
- Purchaser has confirmed return authorization directly with Torontech.
- Merchandise is regular catalog item. Special order items can not be returned.
- All returned merchandise is subject to inspection by Torontech. Torontech reserves the right to refuse return of any merchandise that is used, damaged, or not part of the current published price list. In the case Torontech does not accept the returned merchandise, reasonable attempts will be made to notify the Buyer and the merchandise will be returned to Buyer as they were received by Torontech. Damaged merchandise that can be restored to original condition and thus accepted for return will be evaluated on an individual basis. The purchaser will be advised of additional expenses for the repair and restoration of the returned item. After approval, these expenses will be charged to the purchaser in addition to the restocking fee.
Change of Terms:
The acceptance of any order by Torontech WorldWide is subject to purchaser's assent to all of the terms and conditions set forth herein. Purchaser's assent to these terms and conditions shall be presumed from the purchaser's placement of an order through the Torontech. Any and all other terms and conditions are expressly rejected, and no addition or modification of terms and conditions shall be binding without the prior agreement of Torontech WorldWide in writing.
Complete Agreement:
The terms and conditions in the Torontech web site, incorporated herein by reference, including forms, acknowledgements, quotations, invoices and sales terms and conditions constitute the entire and exclusive agreement between the purchaser and Torontech WorldWide
Information:
Torontech Inc makes every effort to insure the accuracy of the product information displayed on its web sites, but makes no warranties, expressed or implied, as to the accuracy of the data portrayed on the web sites. Torontech Inc reserves the right to change product information, including pricing information at any time without notice.
Trademarks and Copyrights:
The WorldofTest.com Torontech contains trademarked product names. Product names are not to be reproduced or used in any fashion by any party other than Torontech without the express written consent of Torontech International Inc.. All pictures, descriptions, and other content of this web site are copyrighted by Torontech Inc and may not be used without the express written permission of Torontech Inc. Purchaser acknowledges that they have no right, title, or interest in the trademarks or copyrights in the products, and purchaser covenants that it will take no action to register or otherwise interfere with such rights. Please contact us with any requests for permission or questions about our trademarks.
Warranty Disclaimer:
No warranty or affirmation of fact, express or implied, other than expressly set forth herein is made or authorized by Torontech Inc. Torontech Inc disclaims any and all liability for product defect claims. Torontech Inc does not express or imply a warranty that any product on the web site(s) is fit for a particular purpose. Torontech Inc honors the product warranty as published and made available by Torontech Inc. Warranty claims for products not manufactured by Torontech are the responsibility of the manufacturer. Torontech Inc will always make its best good faith effort to resolve warranty claims.
Force Majeure:
Torontech Inc shall not be liable for any delay in or impairment of performance resulting in whole or in part from Acts of God, service interruptions, labor disruptions, insurrections, governmental decrees or controls, war risks, severe weather, supplies or raw materials, inability to procure or ship products, inability to obtain permits and/or licenses, or any other circumstances or causes beyond the control of Torontech Inc in the conduct of its business.
Torontech Inc Privacy Policy
I. What legal provisions govern our data processing practices? How and from where (internal/external sources) is personal data acquired? What are the rights of the user (web site visitor/registered customer)?
1. General
As a general principle, no personal details need to be provided when visiting our Internet site. Data made available to us by you is treated in strict confidence and in accordance with the provisions of the Federal Data Protection Act. With a few exceptions (see point 2 below), our web server only registers non-personal (anonymous) data concerning the use of our site. Specifically, the log files of our web server, as a general rule, only contain the user's IP address, the last page visited by the user, the browser used, date, time and the file requested. This anonymous data, however, does not permit conclusions to be drawn about the individual users, and merely serves to prepare statistics on the use of our Internet site for the purpose of its improvement. At the same time, great importance is placed on ensuring that usage data is not linked with personal data.
2. Personal data
Person-related data (personal data) is only used if the newsletter is ordered (by email), product(s) is (are) ordered, or to supply product information. We undertake to use the personal data entrusted to us only for the purposes stated. Purchase history is retained for assistance with future customer needs.
II. What security measures are used to protect personal data? What are the user's options for processing personal data?
3. Technical measures
Databases are optimally protected against third party access, loss, misuse and falsification through the use of appropriate technical means. In order to determine the popularity of individual topic areas, cookies are used in those sections. These text files are stored on your hard disk and facilitate your use of our Internet site. Thanks to these cookies, there is no need for specific registration each time you visit a section requiring registration, and we can supply you with the personalized contents you request.
It is for you to decide whether you want to work with cookies and, if so, which kind (permanently stored on the hard disk or only placed for the time of the browser activity). However, we draw your attention to the fact that access to fields requiring registration is only possible with activated cookies.
III. What data is communicated to third parties and for what purposes?
4. Communication of personal data
Personal data entrusted to us by you is not communicated, leased or sold to third parties.
IV. Which department answers questions about the processing of personal data?
5. Contact
In the light of the rapid technical developments in connection with the Internet, we make every effort to constantly improve our Internet site and technical precautions, including those connected with data protection. We will keep you suitably informed about such measures. Any changes will be published here. Further information is available at any time by contacting Torontech Inc.
Disclaimer of liability Torontech Inc shall not be liable for direct, indirect or consequential losses resulting from or in connection with access to, use of or queries to the Torontech web site or its links with other web sites, even if Torontech Inc has previously been informed of the possibility of such losses. No guarantee is provided as to the accuracy of the information disseminated via the Torontech Inc web site. In addition, Torontech Inc guarantees neither the reliability nor the completeness of the information contained on its web site. The information made available on the Torontech and WorldofTest.com web site may be amended at any time without prior notice. In particular, Torontech Inc shall not be liable for losses caused by transmission errors, technical faults and interruptions, breakdowns or an unlawful interference with the user's data processing system or the generally accessible systems and transmission networks. Nor shall Torontech Inc be liable for losses resulting from breakdowns, interruptions or overloads occurring to any data processing systems. If certain links are activated on the Torontech and WorldofTest.com web site, the user may under certain circumstances leave the Torontech web site. Torontech Inc assumes no responsibility for the contents, products or services offered or other information or offers contained on these linked web sites.
