{"product_id":"mini-vertical-baler","title":"Mini Vertical Baler","description":"\u003ch2 dir=\"ltr\"\u003eMini Vertical Baler - ToronBale™ M\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eNot every business generates enough waste to justify a large baling press. The ToronBale™ M mini vertical baler from Torontech is designed for those smaller sites. It comes in 5, 10, and 20 ton versions that turn loose cardboard, paper, and packaging into dense bales weighing 15 kg to 120 kg. The 5 and 10 ton versions sit on a 900 x 570 mm base, similar in size to a home fridge, and total machine weight falls between 450 kg and 1,000 kg.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eElectrical demand is modest, with 1.5 kW, 2.2 kW, and 3 kW motors across the three models. This makes the baler easy to connect in buildings where spare capacity is tight, or where rewiring would cost more than the equipment. Cafes, corner shops, clinics, and ship galleys can therefore handle their own compaction rather than keep paying for pickups of uncompressed waste.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA bottom liquid receiver can be added to any model. It sits below the chamber and gathers the fluid squeezed out of wet loads. Leftover food and damp packaging leak under pressure, and without a tray that liquid lands on the floor. Sites dealing with mixed refuse instead of dry cardboard will see the biggest gain from this add-on.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eMini Vertical Baler - ToronBale™ M Applications\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eThis small baler suits locations that produce steady, moderate quantities of waste and have little room or electrical headroom to spare.\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall Retail and Convenience Stores:\u003c\/strong\u003e compress daily cardboard in a stockroom without giving up a whole equipment bay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCafes, Restaurants, and Bars:\u003c\/strong\u003e reduce packaging waste, and with the liquid receiver, cope with wet food-service refuse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHotels and Guesthouses:\u003c\/strong\u003e deal with housekeeping and kitchen waste inside narrow service corridors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffices and Professional Practices:\u003c\/strong\u003e bale sorted paper and packaging without the footprint or power draw of a large press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial Vessels and Yachts:\u003c\/strong\u003e shrink onboard waste volume when storage space between ports is the limiting factor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClinics and Small Healthcare Sites:\u003c\/strong\u003e gather and compress general packaging waste away from patient areas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshops and Light Manufacturing:\u003c\/strong\u003e manage packaging from components and scrap offcuts at low daily output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchools and Institutional Kitchens:\u003c\/strong\u003e compact cafeteria packaging and paper waste without a large investment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResorts and Tourist Facilities:\u003c\/strong\u003e absorb seasonal waste surges at sites with no central waste system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0710\/5291\/9023\/files\/a8.webp?v=1791954789\" alt=\"Mini Vertical Baler\"\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eStandards\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eTorontech designs the ToronBale™ M around the safety expectations of North American and European workplaces. Its anti-rebound gate follows European and U.S. baler safety practice, a feed-gate interlock stops platen movement when the gate opens, and a separate emergency stop is mounted away from the main control panel. Because safety paperwork differs by destination market and machine configuration, check the certification marks and local code requirements with Torontech before installation.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eMini Vertical Baler - ToronBale™ M Key Features\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eThe ToronBale™ M uses the same class of hydraulic parts and safety interlocks found on Torontech’s larger balers, packed into a body suited to tight premises.\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact 900 x 570 mm Footprint:\u003c\/strong\u003e the 5 and 10 ton versions need about as much floor as a home refrigerator, so they slot into stockrooms and service corridors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Power Demand:\u003c\/strong\u003e motors from 1.5 to 3 kW spare older buildings from the electrical upgrades that bigger presses often require\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Bottom Liquid Receiver:\u003c\/strong\u003e a tray beneath the chamber catches pressed-out fluid, which keeps floors dry and drainage under control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Press Ratings, 5 to 20 Tons:\u003c\/strong\u003e with bale weights of 15 kg to 120 kg, buyers can choose the model that fits their real daily waste output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Chain Bale Ejector:\u003c\/strong\u003e pushes the tied bale out of the chamber at the press of a button, so no one has to tip it by hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-Rebound Gate Structure:\u003c\/strong\u003e designed to European and U.S. safety practice, it keeps compressed material from springing back and stops the door from moving unexpectedly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeed Gate Ram Interlock:\u003c\/strong\u003e the platen stops descending as soon as the loading gate opens, which keeps hands out of the compression zone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndependent Emergency Stop:\u003c\/strong\u003e a separate, clearly visible circuit shuts down hydraulic operation without relying on the main controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Ram Guides:\u003c\/strong\u003e hold the platen level when waste is packed unevenly and shield the cylinder seals from sideways strain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Load-Balancing Design:\u003c\/strong\u003e shares compression force across the platen, so lopsided loads do not jolt the ram mid-stroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Valve Block:\u003c\/strong\u003e a Taiwan-sourced valve assembly makes servicing straightforward for machines installed far from technical support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-Coupled Motor and Pump:\u003c\/strong\u003e a cross-connected direct drive keeps motor and pump perfectly aligned, takes the place of standard couplings, and prolongs pump life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNOK Hydraulic Seals:\u003c\/strong\u003e Japan-sourced seals stretch the time between services and cut downtime for seal changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA.M.C. Oil Pipe Joints:\u003c\/strong\u003e Japan-made fittings keep hydraulic lines sealed despite temperature swings and vibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Bale Height:\u003c\/strong\u003e set the bale between 200 and 800 mm, depending on the model, to produce bales light enough to move without a pallet jack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003eTheory and Method\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eTonnage by itself says little about performance. What actually compresses waste is pressure, meaning force spread over the face of the bale. In a compact chamber, even moderate force translates into effective pressure. The 20 ton ToronBale™ M pushes on an 800 x 600 mm face and generates around 400 kPa. A 60 ton press spread across an 1,800 x 1,000 mm face produces a lower figure. Tonnage grows with chamber size, not with how well the waste is compacted.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe real trade-off with a small baler is throughput, not bale quality. Chamber volume and cycle time control how much waste is processed per shift, and both are limited on this class of machine. A site producing a few cubic meters of loose waste a day will fill the chamber without trouble, but a site producing ten times as much would find the operator idle while the press catches up. Choosing a chamber that fits daily output is smarter than chasing a bigger tonnage number.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWet waste adds another challenge. Pressing food scraps or damp packaging squeezes out liquid, and it must be directed somewhere. If it spreads across the floor, it creates a slipping risk, draws pests, and may carry non-compliant waste into a floor drain. The optional receiver beneath the chamber captures that liquid for proper disposal, which is why it is offered on a machine type so often placed close to food preparation areas.\u003c\/p\u003e\n\u003ch2\u003eMini Vertical Baler - ToronBale™ M Technical Specifications\u003c\/h2\u003e\n\u003ctable class=\"table\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\" width=\"881\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eToronBale™ M-5\u003c\/th\u003e\n\u003cth\u003eToronBale™ M-10\u003c\/th\u003e\n\u003cth\u003eToronBale™ M-20\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePress Force\u003c\/td\u003e\n\u003ctd\u003e5 tons (approx. 49 kN)\u003c\/td\u003e\n\u003ctd\u003e10 tons (approx. 98 kN)\u003c\/td\u003e\n\u003ctd\u003e20 tons (approx. 196 kN)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed Opening Size (L × H)\u003c\/td\u003e\n\u003ctd\u003e600 × 400 mm\u003c\/td\u003e\n\u003ctd\u003e600 × 400 mm\u003c\/td\u003e\n\u003ctd\u003e700 × 400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBaling Chamber Height\u003c\/td\u003e\n\u003ctd\u003e1,000 mm\u003c\/td\u003e\n\u003ctd\u003e1,000 mm\u003c\/td\u003e\n\u003ctd\u003e1,200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBale Size (L × W × H, H adjustable)\u003c\/td\u003e\n\u003ctd\u003e600 × 400 × (200 to 600) mm\u003c\/td\u003e\n\u003ctd\u003e600 × 400 × (200 to 600) mm\u003c\/td\u003e\n\u003ctd\u003e800 × 600 × (400 to 800) mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBale Weight\u003c\/td\u003e\n\u003ctd\u003e15 to 40 kg\u003c\/td\u003e\n\u003ctd\u003e20 to 50 kg\u003c\/td\u003e\n\u003ctd\u003e60 to 120 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Power\u003c\/td\u003e\n\u003ctd\u003e1.5 kW\u003c\/td\u003e\n\u003ctd\u003e2.2 kW\u003c\/td\u003e\n\u003ctd\u003e3 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine Weight\u003c\/td\u003e\n\u003ctd\u003e450 kg\u003c\/td\u003e\n\u003ctd\u003e500 kg\u003c\/td\u003e\n\u003ctd\u003e1,000 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e900 × 570 × 2,240 mm\u003c\/td\u003e\n\u003ctd\u003e900 × 570 × 2,240 mm\u003c\/td\u003e\n\u003ctd\u003e1,180 × 800 × 2,550 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBale Ejection\u003c\/td\u003e\n\u003ctd\u003eAutomatic chain ejector\u003c\/td\u003e\n\u003ctd\u003eAutomatic chain ejector\u003c\/td\u003e\n\u003ctd\u003eAutomatic chain ejector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLiquid Receiver\u003c\/td\u003e\n\u003ctd\u003eOptional\u003c\/td\u003e\n\u003ctd\u003eOptional\u003c\/td\u003e\n\u003ctd\u003eOptional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials Handled\u003c\/td\u003e\n\u003ctd\u003eFood residue, paper, plastics, textile\u003c\/td\u003e\n\u003ctd\u003eFood residue, paper, plastics, textile\u003c\/td\u003e\n\u003ctd\u003eFood residue, paper, plastics, textile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Torontech","offers":[{"title":"Default Title","offer_id":51044306059503,"sku":null,"price":100.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5291\/9023\/files\/mini-vertical-baler1269268388.webp?v=1791954714","url":"https:\/\/shop.torontech.com\/es\/products\/mini-vertical-baler","provider":"Torontech","version":"1.0","type":"link"}